Sunbeam 2366 Manuel d'utilisateur télécharger pdf (Page 5)

5

ASSEMBLING THE STAND MIXER

Before assembling the mixer, be

sure the speed control dial is in the

OFF position and the electric cord

is unplugged.

ATTACHING THE TURNTABLE

Place the revolving turntable into

the base of the stand by pressing the

turntable into the center hole of the

adjustment slot until it snaps into place.

ADJUSTING THE TURNTABLE

The turntable must be adjusted

depending upon which bowl size is

being used (see “Adding the Mixing

Bowl”). To adjust, press down on the

turntable locator switch and slide switch

to the proper icon.

Attaching and Removing the Mixer Head

To attach the mixing head, press in on

the mixer-release trigger, located at the

rear of the stand.

Place the mixer head on the stand so

that the metal pivot on the bottom of

the mixer head goes into the latched

opening on the top of the stand.

As you release pressure from the

mixer-release trigger, the top of the

latch should clamp around the

metal pivot. Once the mixing head

is lowered into position, it will lock

into place.

To raise the mixing head, press the

head lock button downward while

pulling up on the handle of the mixing

head. Once unlocked, the mixing head

can be removed by pressing the mixer

release trigger.

Be sure the mixer head is securely

in position before using.

NOTE: This mixer is NOT intended

for use away from the stand.

ADDING THE MIXING BOWL

Move the turntable locator switch to the

proper setting - the large bowl icon if

you are using the large bowl; the small

bowl icon if you are using the small

bowl. Place the desired mixing bowl

onto the turntable.

Mixing bowls should NEVER be used in

a conventional oven, microwave oven,

on top of the range or on any other

heated surface.

If mixing bowls are scratched

or chipped, do not use mixer. Mixer

bowl should not be used to blend in

hot liquids.

Mixer-Release

Trigger

Latched Opening

Ball Bearing

Extension

Mixer

Head

Mixer-Release

Trigger

Metal

Pivot

Stand

1 2 3 4 5 6 7 8 9 10 ... 55 56

Commentaires sur ces manuels

Pas de commentaire